The Dew-Not dew remover is a thick film heater made for operation at 12 volts. Sixty-six percent of the surface area is heat emitting – meaning more even heat distribution and no localised hot spots. Using less power than many other dew heaters it’s often possible to dispense with a controller, using only a fused battery cable instead. Scroll down for specs…..
The Sky-Watcher & Clones to T thread Adapter for Straight Through Finders Connects ZWO, QHY6 and Orion SSAG cameras with the T Thread to Sky-Watcher, most Celestron (see below) and Orion 8 x 50 & 9 x 50 straight through finders.
The Sky-Watcher & Clones to C Mount Adapter for Straight Through Finders Connects QHY5-II, QHY5L-II, Lodestar, Orion SSAIO, Mintron, Watec & DMK cameras, via the C mount adapter to Sky-Watcher, most Celestron (see below) and Orion 8 x 50 & 9 x 50 straight through finders.
QHY miniGuideScope Kit – A lightweight Guide Scope for Most Guiders.
Guide cameras with small pixels don’t need big guide scopes! Small pixels detect guide errors with short focal lengths. With reduced focal length FOV is wider and you find guide stars easily. Now with metal dew shield and screws!
QHY5 II and QHY5L II Push Fit Adapter for 50mm Straight Through Finders connects QHY5-II, QHY5L-II, GPCam and Lodestar camerasto Sky-Watcher, Orion and most Celestron (see below) 50mm straight through finders via 1.25″ push fit, rather than screw fit – for convenience of setup.
The PoleMaster adapter for Star Adventurer is an innovative product by QHY to reliably achieve perfect polar alignment in just a few minutes, perfect for portable mounts. this adapter also fits the new MiniTrack LX2!
After considering the feedback from various iterations of the EQ6Wedge over the years, we decided to reconsider the project and take a number of new approaches. This has resulted in several options, at different price points, to suit different end users and their circumstances. See below…….
The EQ6Rail is our successor to the MkIII EQ6Wedge – built on years of customer feedback, with a much simpler, more direct and precise method of adjustment. Because of its efficient design, the EQ6Rail is also more easily fitted and better value. Price includes Worldwide delivery!
Modern Astronomy distributes this product and welcomes dealer enquiries.
Open your window to the universe even wider, with this USB Video Capture adapter that allows you to capture images and videos from the Revolution Imager. This adapter also opens up the world of digital imaging.
The Low Profile SCT to T Thread Adapter connects any camera or accessory with Female T thread to a telescope / accessory with Male SCT fitting.
Commonly used with Schmidt-Cassegrain, ACF, EdgeHD and Refractors with Male SCT thread. Optical depth is as low as practicable.
The Low Profile Canon EOS T Ring is an Ultra slim EOS T ring, only about 1mm thick compared to the standard 11mm . Useful when you need to reduce the length of the optical path – for reducers, correctors etc.
The EQ6Bolt Replacement Latitude Adjustment Bolt for EQ6 and NEQ6 Mounts is hand made for MA by our engineer, using a Stainless Steel that has the best resistance to bending we can find. Performance is better than any similar commercial product, regardless of price.
The Sky-Watcher & Clones to C Mount Adapter for Right Angled Finders Connects QHY5-II, QHY5L-II, Lodestar, Orion SSAIO, Mintron, Watec,DMK and other C/CS cameras,to Sky-Watcher, most Celestron (see below) and Orion 8 x 50 & 9 x 50 right angle finders.
The Revolution Imager 6 – 60mm Zoom Lens is a compact 6-60mm f/1.6 zoom lens with a 30mm aperture that can be used to view large deep-sky objects (like the Andromeda Galaxy) without the use of a telescope, or provide a wide-view of the sky for capturing meteors!
Just add a photo tripod and you have a very compact grab-and-go ultra-wide view telescope perfect for the large summer and fall time objects that can fit in your backpack or travel luggage.
The PS3-V Adapter adapts Vixen dovetails to fit 3″ Losmandy / CGEM type saddles
If you own a telescope with a small dovetail (Vixen, Celestron, Meade, SkyWatcher etc) and you want to use it on your new mount with the bigger 3″ Losmandy saddle (Celestron CGE/M, Pro, Losmandy, 10Micron)…
Now you don’t have to remove the existing dovetail from your telescope, just slide the PS3-V adapter over it and hey presto, your telescope fits the new mount!
Long 2″ to T thread camera adapter, combining the attributes of a spacer and adapter, allowing you to attach a DSLR (with T ring) or T thread CCD camera to a 2″ focuser. Spacing is increased by approximately 40mm.
The HitecAstro Mount Hub Pro is an excellent product which seeks to simplify all this by including three of the most useful accessories inside one tidy package which only requires one power cable and one USB cable, thus reducing the clutter around your set up.
The Wi-Fi Emitter allows you broadcast video from the Revolution Imager to your compatible Android or iOS device! This gives you an extra degree of freedom when you’re outside and sharing the wonders of the universe with others. The Wi-Fi emitter is simple to connect and can run from the same 12v DC power source as the other components in the System.