Showing 1–16 of 469 results
The Dew-Not dew remover is a thick film heater made for operation at 12 volts. Sixty-six percent of the surface area is heat emitting – meaning more even heat distribution and no localised hot spots. Using less power than many other dew heaters it’s often possible to dispense with a controller, using only a fused battery cable instead. Scroll down for specs…..
For camera lenses and smaller APOs we stock the CAM10 heater strip
The QHY5L-II Mono Camera is a CMOS camera for auto-guiding, which can also be used for planetary and basic deep sky imaging.
Unlike older CMOS technologies the QHY5L-II has very little fixed pattern noise, and there’s no random horizontal noise.
The Sky-Watcher & Clones to C Mount Adapter for Straight Through Finders Connects QHY5-II, QHY5L-II, Lodestar, Orion SSAIO, Mintron, Watec & DMK cameras, via the C mount adapter to Sky-Watcher, most Celestron (see below) and Orion 8 x 50 & 9 x 50 straight through finders.
12 cm solid Deluxe Vixen style photo dovetail kit supplied with 2x 1/4″ screws and spring washers. Attaches a DSLR or small scope to any mount with a Vixen saddle. Price includes UK delivery.
Please note the 3/16″ Imperial Allen Key is no longer supplied.
The Sky-Watcher & Clones to T thread Adapter for Straight Through Finders Connects ZWO, QHY6 and Orion SSAG cameras with the T Thread to Sky-Watcher, most Celestron (see below) and Orion 8 x 50 & 9 x 50 straight through finders.
The QHY5L-II Colour camera kit is an advanced CMOS camera system used for Planetary imaging applications, which can also be used for Auto-Guiding, basic Deep Sky imaging and Video Astronomy (Electronic Observing) – all with the software provided! The camera has a native CS mount and price includes 2 year Warranty, built in IR block filter and Free Shipping!
QHY miniGuideScope Kit – A lightweight Guide Scope for Most Guiders.
The Baader DSLR Conversion Filter 7-40-50-60-400-450-500-550-600-1000-1100D replaces the internal filter and passes Ha very efficiently, eliminating the cameras’ major disadvantage for astro-imaging.
The Revolution Imager R2 fits standard 1.25″ focusers and lets you see much fainter objects than the eye ever could. This is a powerful and complete system, with 7″ colour monitor, R2 imager, advanced multi-part 1.25″ adapter and focal reducer system plus IR block filter.
We can’t import or ship Li-Ion batteries legally, so supply a USB (5v) to 12v converter cable that allows you to power the imager from a 2A+ USB mobile ‘phone charger or power bank. You can also use a 12 volt DC centre positive 2.1mm/5.5mm supply as used by many astro mounts and cameras. Latest offer – All Sky Lens and USB VidCap device included FOC!
EQDir adapters allow Skywatcher Synscan & Syntrek mounts to be controlled from your PC via USB. 2m long with FTDI chipset.
QHY5 II and QHY5L II Push Fit Adapter for 50mm Straight Through Finders connects QHY5-II, QHY5L-II, GPCam and Lodestar cameras to Sky-Watcher, Orion and most Celestron (see below) 50mm straight through finders via 1.25″ push fit, rather than screw fit – for convenience of setup.
Our short C Mount Adapter is a low profile 1.25″ nosepiece to fit C and CS mount cameras to a 1.25″ focuser. It has a flangeless 15mm barrel made of Anodised Aluminium which is threaded for filters. This adapter can help attain focus with some telescopes, and is useful for varying F ratio when used with a 1.25″ screw in focal reducer.
Price includes delivery!
This is a super wide angle 2.5mm “fast” F1.2 meteor lens which fits QHY5-II Series Cameras, and others, that have a native CS mount. Please contact us if you’re unsure of compatibility.
Showing 1–16 of 469 results