1.25 Inch Push Fit Adapter for SkyWatcher 9 x 50 Standard Finders Connects 1.25″ format cameras like the QHY5L-II, GPCam and Lodestar to SkyWatcher 9 x 50 straight through finders via 1.25″ push fit rather than screw fit – for convenience of setup. Also fits clones like some Celestron and Orion finders.
Connects T Thread Cameras and Accessories to 2″ focusers
Flanged, with Safety Undercut and Threaded for M48 (2″) Filters
Low Profile, Back Focus Utilised can be as Little as 2mm
The Low Profile Canon EOS M48 (Wide T) Ring is an Ultra Slim EOS / M48 x 0.75mm ring, which is only about 1mm thick, compared to the standard 11mm . Useful when you need to reduce the length of the optical path.
The Deluxe Laser Collimator 1.25″ / 2″ simplifies collimation, which is required to align your Newtonian telescope’s optics to ensure the best possible performance.
1.25″ Nosepiece for T Thread Cameras from ZWO, Canon and others, with a female T thread. The nosepiece is male T thread to male 1.25″ and connects any T thread camera to a 1.25″ focuser.
Price includes UK Delivery
A 17mm T Spacer for extending or spacing T threaded accessories at optimal distance. Useful for cameras and telescopes, especially with reducers and correctors
Medium C Mount Adapter (20mm) to 1.25″, connects C / CS mount cameras such as QHY5-II series, Lodestar, Ultrastar, Mintron, Watec, GPCam to a 1.25″ focuser. Threaded for filters.
A pack of two 5mm C / CS Spacer Rings, which allow the use of C mount lenses and accessories on CS mount cameras.
Also useful for extending the distance from camera sensor to focal reducer in Astro-Video / EAA setups.
The 1mm Stainless Steel Fine Tuning Ring for T thread allows fine adjustment of spacing with much higher precision than with T2 extension tubes. Strength is guaranteed with metal rings, unlike some Delrin types.
A 1.5mm version is also available.