The Hitec Astro Four Channel PWM Dew Controller with 2x Power Outputs allows you to individually control the output of four heater strips as well as providing two 12 volt DC power sockets.
The unit is fused @ 8 amps with each channel able to control a large dew strip.
The Watec 902H2 ULTIMATE camera is one of the most sensitive monochrome cameras offered by Watec. It’s the standard camera for basic meteor, occultation and lunar impact study!
However advanced users may wish to consider the Watec 910HX/RC for its higher sensitivity and lower noise. Price includes WorldWide delivery!
NB. this is the international – CCIR version
The Revolution Imager standoff Cable allows you to “view” away from your telescope. Includes video and power extensions along with a joiner, so you can connect several cables together.
Open your window to the universe even wider, with this USB Video Capture adapter that allows you to capture images and videos from the Watec Cameras and Revolution Imager to your PC / Laptop.
The Celestron 1mm C Mount Adapter for Straight Through Finders connects C / CS mount cameras to Celestron 9 x 50 Finders with 1mm pitch rear finder thread. See below for more info. Price includes worldwide postage.
The HitecAstro Single Channel Dual Port Dew Controller is a simple and effective dew controller.
Just plug it in to an appropriate power supply and connect one / two tapes and you’re good to go.
Orange Desiccant beads (small) for QHY cameras with desiccant tube. The beads become translucent, then Green, when damp and can be reactivated by heat.
PoleMaster Adapter for EQ6 / NEQ6 / AZEQ6 / Atlas EQ-G / Atlas Pro / LXD55 / LXD75Â also fits EQ6Pro, NEQ6, HEQ6, AZ-EQ6GT, EQ6-R & Orion Atlas.
External diameter of the part that enters the mount is approx 34.5mm
Polemaster Cameras are available here
All Sky Lens for QHY5L-II Cameras, 1.25mm F2.0 CS Mount.
180 degree Field Of View, works with any 1/3 inch CS mount camera.
High quality lens, suitable for Meteor and Fireball studies
The QHY5III462C Camera and Expansion Kit contains all the items in the standard kit plus a quality Methane (CH4) filter and All Sky Lens.
The most useful and exciting new camera in years and the perfect “All in One Camera” for Planetary, Guiding, Near IR and basic Deep Sky use.
Uses the IMX462 sensor in the SeeStar S50 All-in-One Smart APO Refractor!
Select options
This product has multiple variants. The options may be chosen on the product page
The Low Profile SCT to T Thread Adapter connects any camera or accessory with Female T thread to a telescope / accessory with Male SCT fitting.
Commonly used with Schmidt-Cassegrain, ACF, EdgeHD and Refractors with Male SCT thread. Optical depth is as low as practicable!
The QHY5III462C Planetary and NIR Imaging Camera uses Sony’s latest generation IMX462 back-illuminated sensor with extended red and near infrared response. It has double the Red and NIR sensitivity as earlier BSI sensors. A Deluxe kit and expansion kits are now available. Price includes IR850nm, IR Block & Clear Filters and delivery!
Select options
This product has multiple variants. The options may be chosen on the product page
The QHY268C is a 26mpx APS-C cooled back-illuminated, colour CMOS camera based on the Sony IMX571 sensor with native 16-bit A/D and 3.76um pixels.
FYI this is the SBFL (short back focal length) version. Prices include delivery!
For ZWO enthusiasts the comparable camera is the ASI2600MC Pro
Select options
This product has multiple variants. The options may be chosen on the product page
A desiccant tube for cooled QHY cameras with M5 tapping. Use with our Orange desiccant beads so you can tell when the desiccant needs to be regenerated. One tube is supplied.