The Low Profile T to C Mount Adapter allows you to connect your QHY, ZWO or other C / CS mount camera to any scope, lens or accessory that has male T threads. If threads are fully engaged, both sides and on the connecting parts, this adapter adds 4mm to the light path.
The Low profile T Thread to 1.25″ Eyepiece Holder with Additional T Thread is a versatile adapter that converts any male or female T thread to a 1.25″ eyepiece holder or visual back. Can also be used as a 15mm T spacer.
The Standard T Thread to 1.25″ Eyepiece Holder with Additional T Thread converts any male or female T thread to a 1.25″ eyepiece holder or visual back. Can also be used as a 35mm T spacer.
The TS Universal 2-Inch Field Flattener for Refractors from f4 to f9 is a flat field imaging corrector for almost ALL refractors with a 2″ focuser, producing pinpoint stars from centre to edge!
The flattener has an optical diameter of 45.5 mm and offers reduced vignetting compared to narrower T2 types. Fitting is M48 at both ends.
Our Standard C mount to T Adapter connects any C or CS camera to male T thread, with inner threads for a 1.25 inch filter. Optical length is 21.7 mm and total length is 25mm.
25mm barrel extension for 1.25 inch nosepieces threaded for filters.
Extends nosepieces and eyepieces to deal with excessive back focus or to obtain greater reduction with screw in focal reducers. Made of anodised Aluminium, 1.25″ thread (M28.5) at both ends (M – F)
2″ Visual Back Adaptor with T2 female thread which allows the use of 2″ eyepieces on telescopes / accessories with a male T thread.
Please note this adapter is supplied with one set screw at the present time.
TSRCFlat2 a 2″ corrector for f/8 RC telescopes – no effect on focal length
Suitable for all GSO RC telescopes from 6″ to 16″ and for all other F8 RC telescopes. Covers sensors up to full frame.
Filters for Astro-Video cameras are hard to recommend due to the relatively short exposures involved. After many tests this gentle Universal Contrast Filter (1.25″) has shown merit in reducing light pollution and increasing contrast on all objects.
It is effective mainly in areas where the local light pollution is due to Sodium (yellowish) light.
It’s also been found to be effective in revealing surface features on the planets Mars, Jupiter and Saturn as well as reducing glare when viewing the Moon.
M48 to 2″ EP Adapter, a 2″ Visual Back with M48 female thread, allowing the use of 2″ eyepieces on telescopes or accessories with a male M48 thread.
Please note this adapter is supplied with one set screw at the present time.