Showing 17–32 of 75 results
With the C Mount Adapter for Canon EOS Lenses you can view and image Star Fields, the Milky Way and larger Deep Sky objects such as M31 and M45 with your C mount camera.
Our Male T Thread to Female C Mount Adapter allows the use of C / CS lenses with T thread cameras, the adapter is approximately 7mm thick. Please check spacing to see if lenses will focus with your camera. C mount lenses have 17.5mm back focus and CS lenses 12.5mm, contact us if unsure.
The 100-240V AC Input 12V DC 2A Output is a UK plugged power supply with regulated output of 2A via 2.1mm DC plug.
This dew strip supply cable connects a single dew heater strip to a 12 volt cigar lighter socket, when you don’t want to use a controller. Suitable dew strips for that situation are the Dew Not range
Cigar plug to 2.1mm plug Cable, suitable for Celestron, Skywatcher, Mintron, Atik, QHY etc – fused.
The SPC900/SPC880 & Toucam Pro I & II Telescope Adapter 1.25″ connects SPC900 / SPC880 webcam to 1.25″ focusers, compatible with Toucam Pro I and II and some other webcams.
High quality black anodised Aluminium – threaded for filters.
The Sky-Watcher & Clones to T thread Adapter for Right Angled Finders Connects ZWO, QHY6 and Orion SSAG cameras with the T Thread to Sky-Watcher, Celestron and Orion 8 x 50 & 9 x 50 right angled finders.
Our M8 EQ5Bolt Replacement Latitude Adjustment Bolt is hand made using Stainless Steel with the best resistance to bending. Performance is better than any commercial product. The bolt has a longer “handle”, to make turning easier, especially with cold fingers. Also fits EQ3, CG3, CG5 and clones that use an M8 bolt. Price includes UK delivery
NB. Does not fit the HEQ5 mount and some recent EQ5 mounts, which require an M10 bolt, please check.
Long 2″ to T thread camera adapter, combining the attributes of a spacer and adapter, allowing you to attach a DSLR (with T ring) or T thread CCD camera to a 2″ focuser. Spacing is increased by approximately 40mm.
GSO and Clones to C Mount Adapter for Straight Through Finders connects QHY5-II, QHY5L-II, Lodestar, Orion SSAIO, Mintron, Watec & DMK cameras to GSO & Clones 50mm straight through finders.
GSO and Clones to T Thread Adapter for Straight Through Finders connects ZWO, QHY6 and Orion SSAG cameras with T Thread to GSO & Clones 8 x 50 and 9 x 50 straight through finders.
Clones include Teleskop Service, Altair Astro and Revelation finders.
Other T thread guide cameras will be compatible if their sensors are around 10mm – 20mm below the front surface of the camera. Contact us if unsure.
Male M54 to M48 Female Adapter connects 2 “filters to M54 thread and adapts from M54 to M48 (i.e. a drop down ring).
♦ Female thread: M48 x 0.75 – 2 “filter thread
♦ Male thread: M54 x 0.75
♦ Optical length: only 1.5 mm
Our 2 inch Nosepiece for M48 Thread Cameras has Male M48 Thread to 2″ OD with Female M48 thread for filters. Connects M48 thread Cameras and Accessories to 2″ focusers. Low Profile, no flange and without undercut, back focus lost can be essentially zero if all threads are fully engaged.
Total Length, not including threads, is approx. 28mm
Pack of 3 x 2″ Dust Caps.
Seal your eyepieces and camera nose-pieces from dust.
QHY5-II Series / Lodestar Adapter for Celestron (1mm) Straight Through Finders.
Connects QHY5-II series & Lodestar cameras to the Celestron 9 x 50 straight through finder with coarse threads.
Showing 17–32 of 75 results